Welcome Officers & Board of Directors Divisions Division Speaker Downloads Training & Resources Community Safety Programs Group Discount Programs Safety News Upcoming Events Quick Links		New Requirements for Safety Eyewear The American National Standard Institute’s ANSI Z87 Committee published an updated standard for safety eyewear, which is now effective. Make sure your specs meet these specs! Impact Resistance: There are two classifications for safety eyewear lens impact resistance, basic-impact and high-impact. Consequently, when assessing eye safety risks, it will be necessary to identify the type of safety eyewear according to the level of risk. Low mass/low velocity risk means that the basic impact lens is adequate. High velocity/low mass or low velocity/high mass risks will usually require high-impact lenses. Marking: All lenses are required to have the manufacturer’s logo embossed on the lens. High-impact lenses must include a “+” following the manufacturer’s logo. Basic-impact lenses will not have the “+” following the logo. Lens Thickness: Minimum lens thickness for basic-impact prescription lenses will be 3.00 mm, except those having a plus power of 3.00D or greater, which must have a minimum thickness of 2.5 mm. High-impact prescription lenses shall have a minimum thickness of 2.0 mm at their thinnest part. Non-prescription basic-impact lenses have the same requirements as those for prescription basic-impact lenses. Non-prescription high-impact lenses shall not be less than 2.00 mm thick when used in a frame marked “Z87-2”. No minimum thickness is required if the non-prescription protector is mass-produced. Warning Label: If the protective eyewear meets only the basic-impact rating, it must have a warning label attached. The warning label informs the wearer of the impact limitations of the eyewear. By rule, the warning label should only be removed by the wearer. Visit PIA Partner Link online at www.ohiopia.com/plapartner.
		The Greater Hamilton Safety Council 350 North Third Street Hamilton, Ohio 45011 Phone: (513) 896-5333 Fax: (513) 896-5334 eMail: info@hamiltonsafety.com
		Current Date and Time in Hamilton, Ohio is July 20, 2008 3:42 AM
		Content from the Greater Hamilton Safety Council. Content is protected by the Copyright of its respective holders. Page design by Capture Your Dreams Photography and Web Design. Copyright 2007. All rights reserved. Web hosting by Canville Communications.